Monday, June 15, 2020

Marvelous Designer 9.5 Enterprise 5.1.445.28680 x64 Multilingual ============================= ... is the perfect software for 3D textiles. 3D Model / Characters And people will really need to make 3D models. - Version 9.5 now has new features that are different from the previous version ... * Those who want to start learning now * * Systematic Professionals * * Those who want to retrain as a trainer * * Who wants to sell the software and how to use it * For the convenience of all, upload the complete video file for the 9.5 version of the original site to upload all ... -Setup Installation ..... Copy the license file from the crack folder and Copy Software Software> Right-click> Open file location (Paste) ... Replace ... - Open the software ... - Enter the Password ... Ex .. 12345678 abcdefgh - Click (LOG IN) With a license to the version Online / Offline Available ...

Marvelous Designer 9.5 Enterprise
5.1.445.28680 x64 Multilingual
=============================


... is the perfect software for 3D textiles.
3D Model / Characters And people will really need to make 3D models.

- Version 9.5 now has new features that are different from the previous version ...

* Those who want to start learning now *

* Systematic Professionals *

* Those who want to retrain as a trainer *

* Who wants to sell the software and how to use it *

For the convenience of all, upload the complete video file for the 9.5 version of the original site to upload all ...

-Setup Installation .....

Copy the license file from the crack folder and Copy Software Software> Right-click> Open file location (Paste) ... Replace ...

- Open the software ...
- Enter the Password ...
Ex .. 12345678
abcdefgh

- Click (LOG IN)
With a license to the version
Online / Offline Available ...

                 DOWNLOAD HERE

To download Lessons videos

🍍🍧HandBrake 1.3.3 x32 x64 🍧🍍




*** No need to uninstall the old version ***

... 🎬 Export your own videos (Export / Produce / Deliver / Render) to the internet (facebook / Youtube / Instagram / LinkedIn / twitter) .... etc If you want to upload them on social media, download the file as a file editor (HandBrake). ...

- Format = MP4
- Codec = H.264 (x264)
Framerate = 30 fps

Must be stored ...

Video files made with AVI / MPEG2 will be very small if files are downloaded from HandBrake in this setting, and the file (Mp4-H.264) will be much smaller, but the file will not be much smaller (Codec and Framerate).

                  HandBrake 1.3.3 x32 x64 - 12.9 MB.
                            DOWNLOAD HERE

2020dobe Bridge 2020 v.10.1.0.163 x64 (Repack) 2020-June


Today (15/6/2020) New Version of Repack License ...
(New Black Icon) ...

2020dobe Bridge 2020 v.10.1.0.163 x64 (Repack) 2020-June
=============================

Install the Android Repack Version ...

- Turn Off the Internet ...
- Disable virus programs from Windows ..

-Setup ...
(C: \) ... (OK) ....

-πŸ”³Advertising: install ... check ...

-πŸ”³Visual C ++ .... If it is needed then the check box is displayed ... If no, click "No" ... (INSTALL)

- Click Continue ...
Wait up to (100%) ....

- Exit ... (Exit) ... Exit ... Restore files ...

- Open the software and use the online version of the software ...

# Good Luck!

Adobe Bridge v.10.1.0.163 x64
Adobe Bridge v.10.1.0.163 x64 (Repack) - 645 MB.

PortraitPro Standard 15 v.15.7.3 (x86_x64) Multilingual + License Key + Tutorial HD Video (3) files.


Facial editing Skin Eyes Eyebrows Nose mouth , Go, go! Hair Removal Tips
Retouch Software is ...

*** How to upload HD Video (3) files for the first time ... Download if needed ***

PortraitPro Standard 15 v.15.7.3
(x86_x64) Multilingual + License Key + HD Video (3) files.
=============================

*** Please read carefully how to install the license and then install it ***

-Setup Install ... x32 _x64 is the same ...

- Never open the software ...

- (Crack) Open the folder ...
Start the Registry Editor (x32) bit windows (01-HKLM-Anthropics) Reg folder in the Win x86 Reg folder and right-click> Merge> Yes> OK ...

bit windows (x64)
- Signed in Winx64 Registry folder (01-HKLM-Anthropics) and right-click> Merge> Yes> OK ...
- (02-HKLM Wow6432-Anthropics) and right-click> Merge> Yes> OK ...

- Open the software .... You will be asked to activate .....
- As shown in the picture ..

Select theManual Activation tab ...

2. Click Key From File ...

In the Crack folder, select the PPKey file and open it ...

* Thank You, Your License has been activated.
(OK) ... the software will open ...

How To Use It From The Tutorial Folder The First (1) (2) (3) Video File Can Use Programming ...

PortraitPro Standard 15 - 99.7 MB.

How to use a HD video file: 176 MB.

Tuesday, May 19, 2020

Pump Size တွα€€်α€”α€Š်း

(Freewill Engineering Training α€™ှ α€žα€„်တန်းα€žူα€œေးα€α€šောα€€်α€€ Pump Size တွα€€်α€”α€Š်းα€€ို α€€ိုα€š်တိုင် α€›ေးα€žားြပီး Sharing α€œုပ်ပေးထားတာ ခွင့်တောင်းြပီးြပန်α€›ှα€š်ပေးပါα€›α€…ေ)

Pump size တွα€€်ချင်ရင် ထရင်ဆုံး flow rate α€€ို ထရင်α€›ှာα€›α€™α€š် flow rate α€žိα€–ို့ over head tank size α€žိα€–ို့α€œိုα€™α€š် over head tank ထဲα€€ို α€˜α€š်α€”ှα€…်α€™ိα€”α€…်α€”ဲ့ α€›ေα€–ြα€Š့်ချင်တာα€œဲα€žိα€–ို့α€œိုα€™α€š် α€’ါα€€ြောင့် α€€ိုα€š့်တွα€€်α€™α€š့် ဆ/ဦ α€›ဲ့ ground tank size α€€ိုထရင်α€›ှာα€™α€š်
e.g 2U 4 S ထတွα€€်ဆို 1unit α€™ှာ α€œူ (၅) α€šောα€€်α€”ေα€™α€š် α€œူတစ်α€šောα€€်α€€ တစ်α€”ေ့α€€ို gal 40 α€žုံးα€™α€š်
2U4S ဆိုတော့ ထားα€œုံး (၈)ခန္းα€›ှိα€™α€š် GT size တွα€€်ချင်ရင် (၂)α€›α€€်α€…ာ ထားတွα€€်α€›α€™α€š်
2U4Sထတွα€€် တစ်α€”ေ့တာα€›ေα€œိုထပ်ချα€€်ပမာဏ= 8ခန်း* 5α€šောα€€်* 40 Gal = 1600 gal /day α€›α€™α€š်
GT size α€€ (၂) α€›α€€်ထတွα€€်ဆိုတော့ 1600 * 2= 3200 Gal α€–ြα€…်α€žွားα€™α€š်
OH tank size α€€ တစ်α€”ေ့တာα€›ေα€œိုထပ်ချα€€် ပမာဏရဲ့ 50% ပဲα€›ှိα€›α€™α€š်ဆိုတော့ = 1600 gal/2= 800 Gal OH tank size α€›α€™α€š်
OH tank size ရပြီဆို ထဲ့ tank ထဲα€€ို α€˜α€š်α€”ှα€…်α€™ိα€”α€…်α€”ဲ့ α€›ေတင်ချင်တာα€œဲဆိုတဲ့ flow rate α€€ိုတွα€€်α€›α€™α€š်
e.g 800 Gal OH tank α€€ို 15 α€™ိα€”α€…်α€”ဲ့α€›ေတင်ချင်ရင်
15 minute = 800 gal
1 minute   = ?
                    = 800* 1/15
   1. flow rate= 53.33 gal/min α€›α€™α€š်
2. head α€›ှာချင်ရင် α€›ေတင်α€›α€™α€š့် pump to OH tank α€›ဲ့ ထမြင့်ပေα€€ိုα€žိα€›α€™α€š်
α€›ေတင်α€›α€™α€š့် α€‘α€œျားα€œိုα€€် pipe length α€€ြောင့် ဆုံးα€›ှုံးα€™α€š့် friction losses တွေထားα€œုံးထပါတွα€€်α€›α€™ှာα€™ို့ Head တန်α€–ိုးα€€ ဆ/ဦ α€›ဲ့ထမြင့်ပေ α€€ို  losses ထတွα€€် (40%) ထပ်ပေါင်းပေးα€œိုα€€်ရင် α€›ေတင်α€›α€™α€š့် head တန်α€–ိုးα€›α€™α€š်
head = 4ထပ်တစ်ထပ်α€€ို 10' ထားတွα€€်α€™α€š်ဆိုတော့ 40' α€›α€™α€š် ထဲ့α€’ါα€€ို (40%) ထပ်ပေါင်းတော့
total head = 56' α€›α€α€š်
3. Ep = efficiency pump power α€€ို 60% ထားတွα€€်α€™α€š်
4. Em = Efficiency motor power α€€ို 80% ထားတွα€€်α€™α€š်
α€’ီ4 ချα€€်α€žိပြီဆို pump size တွα€€်α€œို့ရပြီ
pump size = (flow rate *  Head)/(33000* Ep* Em)
flow rate α€›ဲ့ α€šူα€”α€…်α€€ lb/min ဆိုတော့
α€›ေ 1gal  =10 Lb 
      53.33 gal=?
                         = (10* 53.33) lb/min α€›α€™α€š်
pump size = (53.33*10)* 56/33000* 0.6*0.8
                     = 1.88 Hp~ 2Hp α€›α€™α€š်
α€’ီα€”α€Š်းထတိုင်းပဲ ထခြား ဆ/ဦ တွေα€›ဲ့ pump size α€€ို α€›ှာα€”ိုင်α€α€š်

α€™ှတ်ချα€€် ဆရာα€žα€„်ထားတာα€€ို α€”ားα€œα€Š်α€žα€œို α€›ေးထားတာပါ ဆရာα€œုပ်တာα€™α€Ÿုတ်ပါ α€™α€žိတဲ့α€žူα€™ျားထတွα€€်ပါ

Credit :Ma Yu Yu Khaing
Freewill M&E Engineering Training(Naypyidaw)


Selection of Cable Trunking

Metal Trunking တစ်ချောင်းα€žα€Š် 2.44m or 2440mm or 8ft ထရှα€Š် α€›ှိပါα€žα€Š် ။

α€‘α€žုံးα€™ျားα€žော Size α€™ျားα€™ှာ
πŸ“ 50mm x 50mm
πŸ“ 75mm x 50mm
πŸ“ 100mm x 50mm
πŸ“ 75mm x 75mm
πŸ“ 100mm x 75mm
πŸ“ 100mm x 100mm
πŸ“ 150mm x 100mm, .....

တချို့ α€”ိုင်ငံα€™ျားတွင် 75 x 25 , 75 x 37.5 စတဲ့ trunking size α€™ျားα€œα€Š်း α€‘α€žုံးပြုα€€ြပါα€α€š်

Trunking size α€›ွေးချα€š်α€›ာတွင်

🎯Area α€›ှာ ပီး calculation α€œုပ်ခြင်း α€”ှင့်
🎯cable factor , trunking factor တို့α€€ို table α€€ြα€Š့်ပီး calculation α€œုပ်ခြင်း ဆိုပီး α€”ှα€…်α€™ျိုး α€›ှိတဲ့ ထဲ α€™ှာ

Area α€›ှာပီး တွα€€်ချα€€် α€”α€Š်းα€€ို sharing α€œုပ်ချင်ပါα€α€š်

(α€€ားα€™ောင်းα€žα€„်ရင်တောင် Auto α€€ား တွေ α€˜α€š်α€œောα€€်α€™ျားα€™ျား manual α€”ဲ့ ပဲ α€… α€žα€„်α€€ြရတာα€™α€œား 😁 ထဲ့တာα€€ြောင့် α€™α€œွα€š်တာα€œေး ထရင်တွα€€်ပြတာပါ α€”ော် )

Example : lighting ckt (2.5mm2) α€€ 10 ckt ,
Power ckt (4mm2) α€€ 8ckt
ထဲ့ α€€ြိုး တွေ ထတွα€€် cable trunking size α€›ွေးချα€š်ပါα€™α€š်

Area of Cable
============

🌟Area α€™α€›ှာခင် ပြောပြချင်တာ တစ်ခု α€€
1.5 , 2.5 , 4,6,10 mm2 ဆိုတာα€€ conductor (copper ) α€›ဲ့ Area ပါ
Insulation ထတွα€€်  မပါပါα€˜ူး
ထဲ့တာα€€ြောင့် insu ထပါ area α€€ို ထပ်α€›ှာပေးရတာပါ 🌟

🎯Area of 2.5 = Ο€/4 (d)2 = 3.142 x 3.7 x 3.7 / 4
 = 10.75 mm2
( 3.7 mm α€žα€Š် α€€ြိုး ၏ dia(insuထပါ ) α€–ြα€…်ပါα€žα€Š် ။ α€™ိα€™ိα€α€š်α€šူα€žα€Š့် cable ၏ Catalogue တွင် α€€ြα€Š့်α€”ိုင်ပါα€žα€Š်။ )

Total Area of 2.5 = 30 x 10.75 = 322.5 mm2
(1ckt တွင် α€€ြိုး ၃ ချောင်း , 10 ckt တွင် α€€ြိုး ၃၀ )

🎯Area of 4  = Ο€/4 (d)2 = 3.142 x 4.3 x 4.3 / 4
 = 14.52 mm2
( 4.3 mm α€žα€Š် α€€ြိုး ၏ dia(insuထပါ ) α€–ြα€…်ပါα€žα€Š် ။ α€™ိα€™ိα€α€š်α€šူα€žα€Š့် cable ၏ Catalogue တွင် α€€ြα€Š့်α€”ိုင်ပါα€žα€Š်။ )

Total Area of 4 = 24 x 14.52 =348.48 mm2
(1ckt တွင် α€€ြိုး 3 ချောင်း , 8 ckt တွင် α€€ြိုး 24)

α€€ြိုး ၏ α€…ုα€…ုပေါင်း area = 322.5 + 348.48 mm2 =670.98

Area Of metal trunking
===================
50 x 50 = 2500 mm2

% α€›ှာα€€ြα€Š့်ပါα€™α€š်
Trunking area α€›ဲ့ 40 % α€€ို ပဲ α€€ြိုး α€‘α€Š့်ပါα€™α€š်
တချို့ company တွေကတော့ 60 % α€œောα€€်ထိ α€‘α€Š့်α€€ြပါα€α€š်
ထခုကတော့ 40% α€”ဲ့ ပဲ တွα€€်ပါα€™α€š်

( 670.98 / 2500 ) x 100
= 27 % ပဲ α€›ှိα€œို့ ckt ထကုα€”် α€œုံး ထတွα€€် 50 x 50 trunking α€€ို α€›ွေးချα€š်α€œို့ရပါα€α€š်

NOTE
=======
Electrical Work ထတွα€€် trunking ထရောင်α€žα€Š် α€œိα€™္α€™ော် α€›ောင်α€–ြα€…်ပါα€žα€Š်။

α€œေ့α€€ျင့်ချင်α€žူα€™ျား ထတွα€€် 2.5mm2 ckt 20 α€”ဲ့
 4 mm2 16 ckt α€€ို α€‘α€Š့်α€–ို့ထတွα€€် MT size α€›ွေးချα€š်ပေး ပီး
ထောα€€်α€€ comment α€™ှာ α€›ေး ခဲ့ ပေး α€œို့ ရပါα€α€š်
α€™ှα€”် α€™α€™ှα€”် reply α€œုပ်ပေးပါ့α€™α€š် α€›ှင့် 😊☺

πŸ“– α€™ျိုးဆက်α€žα€…်ထင်α€šာα€™ျား ထဆင်ပြေα€€ြပါα€…ေ။ πŸ“–
Crd-Htet Htet

https://www.facebook.com/profile.php?id=100008671923276

Photo from google

Pump head &Pressure loss တွα€€်α€šူခြင်း Pump Head (α€žို) Pressure Loss α€€ိုတွα€€်α€šူခြင်

Pump head &Pressure loss တွα€€်α€šူခြင်း

Pump  Head  (α€žို)  Pressure  Loss  α€€ိုတွα€€်α€šူခြင်း
α€Ÿာ  Fluid  Flow  α€›ဲ့  α€žα€˜ောတရားတွေα€€ိုα€”ားα€œα€Š်ထားα€–ို  α€œိုထပ်ပါα€α€š်။ Hydraulics  α€œိုခေါ်တဲ  ထခြေခံ  Fluid  Mechanics  α€€ိုα€”ားα€œα€Š်ထားရင်တွα€€်α€œိုα€›α€”ိုင်ပါα€α€š်။  α€‘α€œုပ်α€–ြα€…်α€›ုံ  တွα€€်တဲα€”ေα€›ာα€™ှာ α€‘α€žုံးမပြုပေα€™α€š်  ထင်ဂျင်α€”ီα€šာတစ်ဦးထနေα€”ဲ  ထခြေခံထားα€–ြင်  Fluid  α€›ဲ့  Density,  Specific  Weight,  Viscosity တ ို α€€ိုα€”ားα€œα€Š်ထားရပါα€™α€š်။  ထဲတာတွေα€€ိုတော  Fluid  Mechanics  α€…ာထုပ်တွေα€™ှာ  α€›ှာα€€ြံဖတ်α€€ြပါα€›α€”်။  α€€ျွα€”်တော်ကတော α€‘α€œုပ်  ုα€œα€•်α€œိုα€›α€›ုံပဲα€›ေးα€žားα€™ှာα€–ြα€…်တဲထတွα€€်  α€‘α€žေးα€…ိတ်α€™α€–ေါ်ပြတောပါα€˜ူး။ Pump  တစ်α€œုံးα€›ေα€™ောင်းတင်α€›α€™α€š်ပမာဏကိုα€žိပြီးα€”ောα€€်  ထဲα€žα€Š်  α€œိုထပ်တဲ  ပမာဏထတိုင်း  α€›ေα€œှောင်α€€α€”်ဆီα€™ှာ  α€›α€›ှိα€…ေ α€–ိုထတိထကျα€œိုထပ်ပါα€α€š်။  α€žိုပေα€™α€š်α€œα€Š်း  Transfer  Tank  α€€α€”ေ  Storage  Tank  ဆီα€€ိုဆက်α€žွα€š်တဲထကြား  ဆုံးα€›ှုံးα€™ တွေα€›ှိပါα€α€š်။  α€”ောα€€်ပြီး  α€’ေါင်α€œိုα€€်ထတိုင်းα€α€Š်α€›ှိα€”ေတဲ  ပိုα€€်ထဲα€™ှာ  α€›ှိတဲ  α€›ေα€€ြောင်α€–ြα€…်ပေါ်α€”ေတဲ  α€–ိထားα€€ိုα€œα€Š်း တွα€”်းထုတ်α€”ိုင်α€–ိုထားတစ်ခုα€œိုထပ်ပါα€α€š်။  α€›ေα€€α€”်α€”ေα€›ာ  α€›ေပိုα€€်α€žွားα€›ာα€œα€™်းα€€ြေင်းတွေα€€ို  ပုံပေါ်α€™ှာ  α€”ေα€›ာချပြီးပြီဆိုα€œျှင် ပိုα€€်ထရှα€Š်α€€ိုα€žိα€›ှိα€”ိုင်တဲထတွα€€်  Pump  Head  α€€ိုတွα€€်ချα€€်α€”ိုင်ပါပြီ။  α€žုံးတာကတော  Hazen  William  Equation  ပါပဲ။
 α€₯ပမာတစ်ခုတွα€€်ပေးပါα€™α€š်။ α€’ါကတော  ပန်α€™ှာပါ၀င်တပ်ဆင်α€›α€™α€š်
 Valve,  Strainer,  Pressure  Gauge  စတာတွေပါတဲ  Pump  Layout  ပုံα€œေးပါ။
တ ွ α€€် တ ဲ့ထခါ  α€‘α€Š်စဉ်းα€…ားα€›α€™α€š်ထရာတွေပါ။
Gate  Valve  –  2  (in/out)
 Strainer  –  1
Pressure  Gauge  – 2  (in/out)
Check  Valve  –  1
Globe  Valve  –  1
Flexible  Connector  –  2  (in/out)
 α€–ေါ်ပြပါ  ပစ္α€…α€Š်းα€™ျားα€›ဲ့  Losses  Data  α€€ိုတော  Supplier  (α€žို) Manufacturer  ဆီα€™ှα€›α€šူပါ။  α€‘α€žုံးပြုα€™α€š်  Equation  ကတော ထောα€€်α€™ှာα€–ြα€…်ပါα€α€š်။

Pipe  Size  α€€  Diameter  100  mm   Flow  Rate  α€€  ထပေါ်α€™ှာတွα€€်ထားတဲထတိုင်း  2.08  l/s  α€€ိုα€šူပါα€™α€š်။
(၁)  ပထမဆုံးစဉ်းα€…ားα€›α€™ှာα€€  ထောင်α€œိုα€€်ပိုα€€်ထဲα€™ှာα€›ှိတဲ  Static  Lift  α€–ြα€…်ပါα€α€š်။ ထမိုးထိထမြင့်α€€  ၁၅၇.၉  -  α€™ြေထောα€€်ထပ်α€€  ၁၀၇.၃၀ တင်α€›α€™α€š်  ထမြင်  =  ၁၅၇.၉-၁၀၇.၃  =  ၅၀.၆  α€™ီတာ

 (၂)  Accessories  တွေα€€ြောင်α€–ြα€…်α€™α€š်  Losses  (Supplier  ဆီα€€α€›α€šူပါ)
Gate  Valve  –  2  (in/out) 
Strainer  –  1   
Pressure  Gauge  –  2  (in/out)
Check  Valve  –  1
Globe  Valve  –  1
 Flexible  Connector  –  2  (in/out)
Elbow  (ထကြα€™်းထားα€–ြင်  ထရေထတွα€€်) 
 α€–ေါ်ပြပါ  Accessories  တွေထတွα€€်  α€Šီα€™ျှတဲ  ပိုα€€်ထရှα€Š်တွေα€€ိုတော  ထောα€€်α€€α€‡α€šားα€€α€”ေα€›α€šူα€”ိုင်ပါα€α€š်။ 
Credit
YanMyoAung(α€œိုတရ)
2002/2004
TAW WIN ALINN ENGINEERING TRAINING CENTRE
& CO.LTD